how to underclock your Samsung Galaxy Note?
Most users would prefer overclocking their mobile phones to gain better performance. But underclocking has its benefits which most would agree with. The Samsung Galaxy Note features a dual core 1.4 GHz processor and has a battery specification of 2500 mAh which can give you a maximum talk
time of approximately 13 hours. But since the Galaxy Note is designed to be your personal
portable computer assistant while on the continuous move, making calls, taking notes,
surfing the web and a load of features being used on the spectacularly large 5.3-inch Super AMOLED display can run your battery down to less than half its expected time. And if you
want to overclock your phone just to get higher performance from it, think twice—how will you really benefit? Overclocking your phone simply allows a few tasks such as starting an application, and
displaying or scrolling through the home screens or photos, a bit quicker. But do your basic needs such as browsing the internet, watching a movie, composing an SM or email or listening to music, need an overclocked processor? Definitely not—the internet speed will be the same, videos and music won’t play any faster or better, and composing a message would be limited to your typing speed and so on. So why overclock and lose precious battery life? If this does not make sense to you, I suppose you should be happy in carrying
along your charger wherever you go. Others can read on. Underclocking your smartphone can
save you loads of battery juice that can be highly beneficial when you are constantly outdoors or travelling on a long journey. There are a lot of options, that after tweaking, can help you reduce
the power consumption and increase battery life. For example, switching off the Bluetooth, GPS and wireless radio when not needed, lowering the brightness levels of the display when in a
darker environment, switching the phone to flight mode when it is not needed, and underclocking your processor. Most Android based smartphones which have stock operating systems installed
from their manufacturer, lack the ability of overclocking or underclocking their processor to save on power consumption. There are a few that might allow you to do so, but have limitations to overclocking or underclocking around 20 percent and the Galaxy Note is no outsider to this fact. In this workshop, we
shall show you how you can underclock your Galaxy note to as low as 100 MHz
to help save on battery life. The only one who can command the processor to underclock or overclock is the kernel and a properly tweaked one can definitely put a smile on your face when you see your
battery icon still in green.
Here is a list of requirements that you would need to get your Galaxy Note
saving on battery life.
time of approximately 13 hours. But since the Galaxy Note is designed to be your personal
portable computer assistant while on the continuous move, making calls, taking notes,
surfing the web and a load of features being used on the spectacularly large 5.3-inch Super AMOLED display can run your battery down to less than half its expected time. And if you
want to overclock your phone just to get higher performance from it, think twice—how will you really benefit? Overclocking your phone simply allows a few tasks such as starting an application, and
displaying or scrolling through the home screens or photos, a bit quicker. But do your basic needs such as browsing the internet, watching a movie, composing an SM or email or listening to music, need an overclocked processor? Definitely not—the internet speed will be the same, videos and music won’t play any faster or better, and composing a message would be limited to your typing speed and so on. So why overclock and lose precious battery life? If this does not make sense to you, I suppose you should be happy in carrying
along your charger wherever you go. Others can read on. Underclocking your smartphone can
save you loads of battery juice that can be highly beneficial when you are constantly outdoors or travelling on a long journey. There are a lot of options, that after tweaking, can help you reduce
the power consumption and increase battery life. For example, switching off the Bluetooth, GPS and wireless radio when not needed, lowering the brightness levels of the display when in a
darker environment, switching the phone to flight mode when it is not needed, and underclocking your processor. Most Android based smartphones which have stock operating systems installed
from their manufacturer, lack the ability of overclocking or underclocking their processor to save on power consumption. There are a few that might allow you to do so, but have limitations to overclocking or underclocking around 20 percent and the Galaxy Note is no outsider to this fact. In this workshop, we
shall show you how you can underclock your Galaxy note to as low as 100 MHz
to help save on battery life. The only one who can command the processor to underclock or overclock is the kernel and a properly tweaked one can definitely put a smile on your face when you see your
battery icon still in green.
Here is a list of requirements that you would need to get your Galaxy Note
saving on battery life.
- A ROOTED GALAXY NOTE: We assume you already have a rooted one, and if you don’t, you can follow the procedures mentioned here. (http://www.crackohack.in/2012/06/root-samsung-galaxy-note-tutorial.html)
- CLOCKWORKMOD RECOVERY ALREADY INSTALLED ON THE PHONE: If you do not have it yet, you can get it done by installing ROM Manager from the Android Market, its free.
- ABYSSNOTE KERNEL 1.5 OR
HIGHER: This is the Android
kernel which will be replacing the
present kernel on your phone. The
kernel is tweaked and designed
for loads of features including underclocking and overclocking.
Download the latest kernel from
here (http://www.multiupload. com/01PAF6M0BO) So why waste time? Let’s get started already. Download the
latest AbyssNote Kernel from the above mentioned website and save it to your computer desktop. Next, connect your Galaxy Note to your PC or laptop using the USB cable as a mass storage. After a few seconds, your PC should be able to see the SD card of the Note in My Computer. Now copy the Kernel (zip file), you just downloaded, from the desktop to the root or parent folder of the SD card. To ensure that you can find it easily, make sure you don’t save it anywhere deep inside any other sub folders. Once done, disconnect the phone from the PC and
reboot it into recovery mode (Volume Up + Home + Power Button). Once in recovery mode, you will need to first make a nandroid backup so that you can undo all changes in case
you mess up somewhere or if something goes wrong while flashing the kernel. After doing the backup, you will need to clear the cache (Wipe Cache) and Dalvik cache (Wipe Dalvik Cache) to clean out the old system cache junk and make way for the new kernel. Next simply choose the option to install ZIP from SD card and choose the .zip file of the AbyssNote kernel you just copied to the SD card. Let the flashing process complete (approximately 5 – 10 minutes).
Once done, reboot the phone. That’s it! The new kernel does have a lot or tweaks and tricks under its sleeve which can benefit you in a lot of ways. It comprises of bugs and fixes for applications and drivers too. But do note, the kernel development is continuously being made and updates
for the kernel to eliminate bugs and new features are constantly being implemented. Do have a look at the changelog to keep yourself updates on the latest development of this kernel. Now to underclock your processor, you can install SetCPU (not free) or AnTUTU CPU Master (free) from the Android Market and set your Galaxy Note’s Clock speed to whatever you
need. You can overclock your processor up to around 1.7 GHz or underclock it below 100 MHz, choose your level. Do note that underclocking your processor will make your entire operating system feel a little sluggish, but it is the best way to keep your battery from being drained unnecessarily. In either of the programs mentioned above, you can set the processor’s low and high speed thresholds to ONDEMAND to be scaled by the governor. This setting will set the processor speed to only the required amount and lower it to the minimal set value when not in use.
Post A Comment
No comments :
Great! You've decided to leave a comment! Please bear in mind that comments are often moderated and that rel="nofollow" is in use and spammy comments will be deleted. Let's have a meaningful conversation instead. Thanks for stopping by!